Product ID:MOLECULAR SIEVE TYPE 4 A
MSDS Date:01/01/1987
FSC:6850
NIIN:01-213-1235
MSDS Number: BJJJS

Emergency Phone: 304-744-3487

Info Phone: 304-744-3487

Cage: 9B634

Telephone: 909-825-1793

Cage: 9B634

MOLECULAR SIEVE TYPE 4A; CHEMICAL

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:IRRITATION OF EYES, NOSE AND THROAT BY
DUST. BREATHING DUST MAY BE HARMFUL. MAY CAUSE SKIN IRRITATION.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:INHAL:REMOVE TO FRESH AIR. SUPPORT BREATHING (GIVE
OXYGEN/ARTIFICIAL RESPIRATION) .INGEST: CALL MD IMMEDIATELY .EYE
CONTACT:IMMEDIATELY FLUSH W/PLENTY OF WATER FOR AT LEAST 15 MIN.GET
MD I F IRRIT PERSISTS.

Flash Point:NONFLAMMABLE
Unusual Fire/Explosion Hazard:NONE KNOWN

Spill Release Procedures:SWEEP UP AND PLACE IN A WASTE DISPOSAL
CONTAINER.FLUSH AREA W/ WATER. AVOID RAISING DUST.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:OPEN CONTR SLOWLY TO AVOID DUST.DO NOT
GET IN EYES.AVOID BRTHG DUST&PRLNGD CNTCT W/SKIN.USE W/ADEQ VENT.
KEEP CONTR CLOSED. WASH THORO AFTER HANDLING.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Respiratory Protection:IF THERE IS EXCESSIVE DUSTINESS, WEAR A
NIOSH/MSHA APPROVED RESPIRATOR SELECTED AS PER OSHA 29 CFR
1910.134.
Ventilation:SEE OSHA 29 CFR 1910.134.USE WITH ADEQUATE VENTILATION.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health
NO TLV'S HAVE BEEN ESTABLISHED FOR THIS PRODUCT IN OSHA 29 CFR
1910.1000 (1976) OR ACGIH 1977. PH: IF IN AQUEOUS SLURRY-- 8-11.

Spec Gravity:1.1
pH:SUPDAT
Solubility in Water:NEGLIGIBLE
Appearance and Odor:NO ODOR-DEPENDING ON PRODUCT MAY APPEAR AS A
BEAD,PELLET,MESH OR POWDER.

Stability Indicator/Materials to Avoid:YES
SUDDEN CONTACT W/ HIGH CONCENTRATIONS OF CHEMICALS HAVING HIGH HEATS OF
ADSORPTION SUCH AS OLEFINS,HCL,ETC.
Stability Condition to Avoid:NONE KNOWN
Hazardous Decomposition Products:NONE KNOWN

Waste Disposal Methods:BURY IN LANDFILL.DISPOSAL MUST BE IN ACCORDANCE
WITH FEDERAL,STATE AND LOCAL REGULATIONS .

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.